Field of application： HF/50MHz Transceiver
Field of application： HF/50MHz Transceiver
X5105 is a complete "grab and go" station in a ruggedly-stylish compact enclosure.
Go ahead, pick it up! Fits comfortably in your hand, yet it delivers all the powerhouse features normally reserved for a full-sized HF transceiver.
Going on a trip? Leave the accessory bag at home -- everything you need is already built in. Just toss up an antenna and you're on the air!
Here are some of the X5105's advanced features:
? Large back-lit multi-function LCD display screen
? Transmit on all bands, 160 through 6 meters including 5 MHz
? Receive with gap-free coverage from 500 kHz to 54 MHz
? Operate on all modes (USB, LSB, CW, AM, FM, and Digital)
? Selectable IF bandwidth (500-Hz CW, 2.4-kHz SSB, 6-kHz AM)
? Built-in DSP, noise blanker, and notch filter to suppress interference
? Robust 600-mW AF-output with high-pass and low-pass audio EQ
? Deluxe multi-function keypad-microphone included
? Low-profile controls, heat sink, and desktop stand all built in
? Powerful 3800-mAh battery for extended "off-the-grid" operation
? More antenna choices using the built-in auto-tuner (ATU)
? Scan-feature displays band activity and plots antenna SWR
? Built-in Data Modem with CAR and AFC tracking, onscreen display
? Built-in auto-keyer with three memory channels plus CW trainer
? Adjustable SSB with speech-processing compressor
? Regular firmware updates are free, on line, any time
? Compact: 6-5/8Wx3-5/8Hx1-7/8D”, weighs 2.1 pounds with battery X5105 comes with features other manufacturers miss, like back-lit lowprofile control switches conveniently spaced for adult-sized fingers, and a highly-visible 3.6-inch back-lit LCD that
displays all aspects of it's operation.
Even the VFO is different, with a unique counter-sunk tuning knob and an unusually wide range of tuning rates (you even get velvet-smooth 1-Hz stepping to lock in data signals).
DX splits are easy to set up, and the wide-range RIT has a precision digital readout for surveying adjacent channels.
Transmit power is adjustable from 0.5 to 5.0 Watts in calibrated half-Watt increments, perfect for operating QRP, running miles-per-watt tests, or setting the correct drive level for an external amplifier.
You even get a built-in data modem with both CAR (carrier) and AFC (frequency) tracking -- plus an onscreen spectrum display. And, when on the road, you can leave your antenna analyzer home because the X5105 plots SWR graphically. Add the wide-range impedance-matching capability of the built-in ATU, and the X5105 can put you on the map from virtually any location.
When receive conditions get rough,the X5105 comes with a powerful toolbox for cutting interference and pulling stations in. There's a sensitive pre-amp to boost weak signals, a front-end attenuator to reduce overload, noise blanking (NB) for impulse noise, digital noise reduction (DNR) for atmospheric noise, variable notch filtering (NF) for pesky heterodynes, adjustable AGCRate (AGC), built-in CW filter, plus variable high-pass and low-pass audio-EQ filtering. And lots of spare audio-output power for driving an external speaker.
In transmit, CW contesting is a breeze! Get variable-speed automatic keying, plus three programmable message channels. For SSB contesting, theadjustable speech processor scores extra points. Deluxe electret keypad microphone places the radio's advanced features at your fingertips. A mic is also built-into for walkie-talkie operation.
Power the X5105 from any regulated 9-15 volt 3-amp DC source or go "off grid" for up to 8 hours using the powerful built-in 3800-mAh Lithium-ion battery pack. Charging is simple because the radio's power-management circuitry continuously monitors battery condition and fully controls the recharge cycle.
Factory tested, complies with FCC rules, and has one year warranty.
160m～6m （Amateur radio band only）
A1A(CW),A3E(AM), J3E(USB/LSB), F3E(FM)
Working temperature range:
-10℃ ～ +50℃
1～60minutes after boot is ±4ppm
@25℃: 1ppm/ hour
Supply voltage :
Normal: 13.8VDC±15%,Negative grounding
operation: 9.0～15.0VDC,Negative grounding
Current consumption :
receive: 600mA@ Max
launch: 2.5A@ Max
Battery capacity :
168*93*47mm（WxHxT） (excluding protrusions)
About 0.94kg (host only)
RF output power:
5W(SSB/CW/FM)1.5W(AM signal carrier) @13.8VDC
SSB: balanced modulation
AM: Low level amplitude modulation
FM: Variable reactance frequency modulation
FM maximum frequency offset:
Stray radiation :
Carrier suppression :
SSB frequency response:
Secondary frequency conversion superheterodyne +audio frequency DSP
(PRE=on, ATT=off, NB=off, NR=off, SSB/CW/AM = 10dB S/N, FM = 12dB SINAD)
Mirror suppression degree :
IF Inhibition degree :
Audio output: 0.6W （8Ω,≤10% THD）
Audio output impedance: 4～16Ω
u The above specifications may be adjusted without notice.
u The frequency range of transceiver will vary according to the machine version. Please consult the dealer for details.